Publicité
Les langues disponibles
Les langues disponibles
O
2.2
VERVIEW PRESENTATION
The chargers are divided into 2 zones :
The user interface zone
The energy conversion zone (all maintenance in this area is forbidden except with CRISTEC authorization, under penalty
of warranty termination)
Fixing of the charger is made by 4 x M6 round head screws (screw head diameter less than 10 mm).
Center distance :
Chargers HPO 12-90, 24-45, 24-60, 24-80 and 48-30 - See appendix 2
Charger HPO 24-100 and 48-50 – See appendix 3
Terminals :
J1201/J1202 : CAN Bus
AC input terminals
Mounting by 2 x M6 round head
on the rear side
screws
U
2.3
SER INTERFACE AREA
Chargers HPO - See appendix 1
Terminals :
X1200 : Remote display
X1201 : Battery temperature probe
X12 : Fault relay
X11 : Low battery +BAT1 relay
X301 : Remote ammeter
J2 : Remote On/Off
DC output terminals
2 x M6 round head screws
Front view
Opening screw for user interface area
(must be screwed to ensure personnel protection)
33
Publicité
