Thitronik WiPro III Manuel D'installation page 27

Installation manual for WiPro III
1.9.5 Diagrams
Transmit LED
Transmitter casing
Option lying
on the left
Window frame
Option lying
on the right
Window frame
For instance, Dometic AGP7 or Seitz AGS5
and similar products
If the available space does not allow for the trans mitter
to be installed on the window frame, the transmitter
can also be mounted on the window pane as shown
on the right.
If installation is not possible using the included adhesive
pads, you can also use screws to fix the transmitter
housing in place. You will find screw position marks
underneath the circuit board.
Please scan the QR code for additional
information and video instructions.
www.thitronik-automotive.de/support.html
It is possible to mount the transmitter
casing in a lying position (on the left or,
Transmitter
rotated 180°, on the right) or standing
cover
on the side – depending on the frame
Reed sensor
and the available space / the distances
to the pane. When the transmitter
Magnet
casing is rotated, the circuit board with
the transmit LED, the reed sensor and
the transmitter cover will keep their
orientation to the magnet.
Option
standing
Window frame
Option
window pane
Window frame
Page 8
GB