Publicité
Les langues disponibles
Les langues disponibles
2. MOUNTING THE WHEELS TO THE LEGS
Parts Required:
2
x
Metal Wheel (#7)
2
x
Washer (#B)
Nut (#C)
2
x
Installation:
•
Slide a metal wheel onto each leg with wheel axle. Secure using a
washer and a nut. Spin each wheel to ensure the wheels turn freely.
3. INSTALLING THE BOTTOM SHELF
Parts Required:
Bottom Shelf (#14)
1
x
Screw (#A)
4
x
4
x
Locking Washer (#D)
4
x
Washer (#E)
Installation:
•
From underneath, secure the bottom shelf to all each leg using a
screw, locking washer, and washer. Ensure the flat surface of the shelf
is facing up.
•
Once the shelf is secure, carefully lift the grill into an upright position.
4. SECURING THE LID STOPPER
Parts Required:
1
x
Lid Stopper (#3)
Installation:
•
Secure the lid stopper onto the top of the main barrel using the pre-
installed screw on the top of the main barrel.
5. ASSEMBLING THE LID HANDLE
Parts Required:
1
x
Lid Handle (#9)
Bezel (#8)
2
x
Installation:
•
Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a bezel on the
screw, then hand-tighten the screw (from the inside) into the lid handle.
•
Repeat same installation for other end of lid handle.
8
2
3
4
5
Publicité
