Publicité
Les langues disponibles
Les langues disponibles
11 - DEFAULT VALUES
The BIOS1 24V control unit has the possibility to select the used motor. This allows to set, as defaults, some parameters for the optimal functioning
of the motor.
Here below, the table of the parameters with the default values assigned that depend on the motor.
MENU
DISPLAY SHORT DESCRIPTION
SEN
BASE
Obstacle sensitivity with running speed
SEL
BASE
Obstacle sensitivity during slowdowns
SPn
BASIC
Running speed.
spL
BASIC
Slowdowns speed.
asL
BASIC
Anti slipping / Extra time.
sIT
ADVANCED
Intervention time of the current sensor.
Disabling time of the current sensor during the start of the
SdT
ADVANCED
motor.
UrA
ADVANCED
Acceleration ramp amplitude.
DRA
ADVANCED
Deceleration ramp amplitude.
DEF
ADVANCED
Restore default settings.
NOTE - To know the type of the selected motor, move on the item menu de.f.: the display shows in alternancethe selected motor number. If a
parameter changes (that depends on the motor type), on the display will also appear the letter
12 - WARRANTY
In compliance with legislation, the manufacturer's warranty is valid from the date stamped on the product and is restricted to the repair or free
replacement of the parts accepted by the manufacturer as being defective due to poor quality materials or manufacturing defects. The warranty
does not cover damage or defects caused by external agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product,
assembly errors, or any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed or repaired. Printed
specifications are only indicative. The manufacturer does not accept any responsibility for range reductions or malfunctions caused by environmental
interference. The manufacturer's responsibility for damage caused to persons resulting from accidents of any nature caused by our defective products,
are only those responsibilities that come under law.
13 - DISPOSAL OF THE PRODUCT
This product is an integral part of the automation, and therefore, they must be disposed of together. As for the installation operations, at the end of
the life of this product, the dismantling operations must be performed by qualified personnel. This product is made from different types of materials:
some can be recycled, others must be disposed of. Please inform yourselves on the recycling or disposal systems provided for by the laws in force
in your area, for this category of product.
CAUTION! – some parts of the product can contain polluting or dangerous substances which, if dispersed in the environment, may cause
serious harm to the environment and human health.
As indicated by the symbol at the side, it is forbidden to throw this product into domestic refuse. Therefore, follow the "separated collection"
instructions for disposal, according to the methods provided for by local regulations in force, or redeliver the product to the retailer at the
moment of purchase of a new, equivalent product.
CAUTION! – the regulations in force at local level may envisage heavy sanctions in case of abusive disposal of this product.
ALLMATIC S.r.l
32020 Borgo Valbelluna - Belluno – Italy
Via dell'Artigiano, n°1 – Z.A.
Tel. 0437 751175 – 751163 r.a. Fax 0437 751065
http://www.allmatic.com - E-mail: info@allmatic.com
20/20
All manuals and user guides at all-guides.com
ITA
ENG
FRA
DEFAULT VALUES
KALOS
KALOS
CUSTOM
XL /
70
MOVEO
40
40
40
60
60
60
100
100
100
50
50
50
15
300
300
2
2
2
15
15
15
10
10
10
10
10
10
0
1
2
c (for example c 1).
ESP
6-1622400 rev. 5
KALOS
XL FAST
KALOS
SIM
110
/ MOVEO
FAST
40
40
10
60
60
10
100
100
100
50
50
65
300
300
300
2
2
10
15
15
30
10
10
10
10
10
10
3
4
5
04/06/2019
Publicité
