Publicité
Les langues disponibles
Les langues disponibles
3 - PRODUCT DESCRIPTION
The control unit BIOS1 24V is suitable for the installations of 1 motor with direct current 24V and a maximum absorption of
easy and intuitive functioning thanks to the display interface and 4 buttons. The control unit allows a precise regulation of all parameters. The control
unit can memorize up to 1000 transmitters (external memory) with the step by step, partial opening, open and close functions. It is supplied with inputs
for opening and closing photocells, safety edge (mechanical or resistive), opening/closing limit switches and buttons for step by step, partial opening,
open, close and stop. The outputs include a 24 Vac flashing light, 24Vac courtesy light/open automation light and 24 Vdc accessories power supply.
Buffer batteries use is available in case it would be necessary to assure the temporary service in case of lack of power.
1
23
2
24
3
J7
4
1
5
3.1 - MAIN COMPONENTS / CONNECTIONS
1.
Fuse 1: T 10A fuse for motor protection.
2.
Connection for motor power supply.
3.
Connection for transformer.
4.
Fuse 3: T 2,5A fuse for 24Vac outputs protection.
5.
Connection for flashing light
6.
Connection for courtesy light / open automation light.
7.
Connection for photocells power supply and 24Vdc accessories.
8.
DIP-SWITCH for safety devices
9.
Connection for command and safety devices.
10. Signaling Led for the inputs state.
11. Connector for optional R1 card.
12. Signaling Led for the radio signal.
6-1622400 rev. 5
All manuals and user guides at all-guides.com
RELAY 4
24
RELAY 3
RELAY 2
RELAY 1
+24VDC
OGL
GND
+24VDC
TX PHOTO
1-2: FLASH
2
3
4
5
6
7
6
7
8
ITA
04/06/2019
22
POWER
ON
UP
23
18
17
19
25
+
26
-
J5
11
ON
DIP-SWITCH
EDGE
PH2
PH1
STOP
PE
8
9
10
11
12
13
13. Connector for external memory.
14. Connector for Bluetooth module.
15. Connector for radio module.
16. Button DOWN -.
17. Button MENU.
18. Button UP +.
19. Button Step-by-Step (SS).
20. Connection for antenna.
21. Display.
22. Led for the presence of the power supply.
23. Fuse 2: F200mA fuse for 24Vdc protection.
24. Connection for the batteries charger card.
ENG
FRA
ESP
10A. This device has an
21
20
22
21
DISPLAY
DOWN
MENU
SS
J3
J4
J2
10
RADIO
OPEN CLOSE PED
SS
COM LS1
LS2
14
15
16
17
18
19
20
9
16
15
14
13
12
FIG. 1
3/20
Publicité
