Imetec N0001 Instructions D'utilisation page 25

rising phase, just after the movement of the mixing blade to reduce the volume of the dough. For the cake
program, it corresponds exactly to the end of the kneading phase.
Program end: Indicates the total recipe execution time at the various browning levels. For certain
programs, the execution end can be delayed by up to 13 hours.
WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
WARNING! Risk of burn. DO NOT touch the external surfaces
during operation and until the appliance has completely
cooled down.
WARNING! The bread may burn and produce flames and / or
smoke. DO NOT use water. Disconnect the appliance and use
a damp cloth to put out any flames.
WARNING! DO NOT touch the mixing blade with your hands
or utensils while it's operating.
WARNING! DO NOT touch the mixing blade with your hands
or utensils while it's operating.
WARNING! The mixing blade must be removed in the exact
moment indicated in the programs table. If it is removed
sooner, the dough may rise too much and come out from the
container while baking.
WARNING! Risk of scalding. Heat and steam come out from
the cooking chamber when opening the lid of the appliance.
WARNING! Risk of scalding. Always wear oven gloves to
open the lid and to remove containers.
WARNING! Risk of crushing. The lid may close accidentally.
WARNING! Risk of scalding. DO NOT move the appliance
while it is in operation.
Programs from no.1 to no.11 carry out the various kneading, rising and baking phases autonomously.
For some of them, the intervention of the user may be necessary.
These programs cannot be used consecutively: there must be a pause (of about 30') to let the machine
cool down completely. If you want to speed up this process, move the machine to a cool, airy place.
• Open the lid.
USE
EN
22