Publicité
Les langues disponibles
Les langues disponibles
BRITAX Child Safety, Inc.
Replacing the Cover
1. Pull the elastic bands over
the hooks on the bottom of
the child seat shell.
2. Hook the clips at the
front of the seat cover
to the bottom of the child
seat shell.
3. Pull the seat cover forward
and push the EZ-Buckle
belly pad through the
appropriate slot in the seat
cover.
4. Hook the elastic straps at
the back of the seat cover
to the child seat shell.
For select covers only:
Hook the clips at the back
of the seat cover to the
child seat shell.
5. Fit the cover over the
CLICKTIGHT and pull
the elastic band over the
hook on the bottom of
the CLICKTIGHT.
6. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
7. Fit the side wing cover to
the child seat shell and pull
the elastic band over the
hook at the top of the child
seat shell. Repeat for the
other side.
40
GROW WITH YOU CLICKTIGHT / PLUS User Guide
8. Pull the bottom elastic
bands over the hooks at
the bottom of each side
of the head restraint.
9. Fit the head restraint cover
over the head restraint and
pull the top elastic bands
over the hooks at the top
of each side of the head
restraint.
10. Attach the hook and
loop fasteners on the
head restraint cover
around the harness.
Removing the Buckle
IMPORTANT:
If your child eats and drinks while in the child
seat, you may need to check the buckle periodically and
rinse out any accumulated debris or dried liquids.
1. Open the CLICKTIGHT.
a. Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Unhook the elastic straps
at the back of the seat
cover from the child seat
shell.
For select covers only:
Unhook the clips at the
back of the seat cover
from the child seat shell.
NOTE: Pull the belly pad
over the buckle retainer
to remove.
41
Publicité
