Télécharger Imprimer la page

Britax GROW WITH YOU CLICKTIGHT Guide D'utilisation page 17

Publicité

Les langues disponibles

Les langues disponibles

BRITAX Child Safety, Inc.
To attach the tether to a tether anchor:
1. Remove the webbing
from the elastic strap and
loosen the tether.
2. Firmly press the hook over
the tether anchor point.
IMPORTANT:
Use the elastic
strap to contain extra webbing.
Always ensure any excess
webbing is contained within
your vehicle.
The Tether as a Crash Indicator
The tether can indicate when the child seat has been in a
moderate or severe crash and replacement of the child seat
is necessary.
IMPORTANT:
Discontinue use of child seat if it has been
involved in a moderate or severe crash, regardless of
whether the loops have pulled through the back side of the
shell and the colored stitching has been ripped.
Figure 1 shows an example
of a tether acceptable for
continued use (provided
the child seat has not been
involved in a crash). The
colored stitching will not be
visible and will be intact.
Figure 2 shows an example
of when the child seat is
unacceptable for continued
use. If one or both of the
loops have pulled through the
back side of the shell and/or
any of the colored stitching
is visible and has ripped,
the child seat is no longer
acceptable for use.
28
Fig. 1
Fig. 2
GROW WITH YOU CLICKTIGHT / PLUS User Guide
Switching Between Modes
It is not necessary to remove the harness to
IMPORTANT:
use this seat in booster mode. To store the harness, follow
the instructions below. If you wish to remove, follow the
instructions on page 32.
Harness to Booster Mode: Storing the Harness and Buckle
1. Loosen the harness
completely.
a. Press release lever.
b. Pull both harness
straps forward.
2. Open the chest clip.
a. Press tabs
b. Pull apart
3. Release the harness
buckle and place the
harness straps around the
armrests.
4. Open the CLICKTIGHT.
a. Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
5. Unhook the elastic straps
at the back of the seat
cover.
For select covers only:
Unhook the retaining clips
at the back of the seat
cover.
6. Pull the seat cover and
foam insert forward.
29

Publicité

loading

Ce manuel est également adapté pour:

Grow with you clicktight plus