Publicité
Les langues disponibles
Les langues disponibles
Cleaning the motorcycle
To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in.
Use specific products only. Prefer biodegradable
products. Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces.
Never clean the motorcycle using hot or high-pressure
water jets. Cleaning the motorcycle with water cleaners
may lead to seizure or severe failure of front fork, wheel
hub assembly, electric system, front fork seals, air inlets
or exhaust silencers and adversely affect the operation of
motorcycle safety features.
If needed, clean off stubborn dirt or exceeding grease
from engine parts using a degreasing agent. Be sure to
avoid contact with drive parts (chain, sprockets, etc.).
Rinse with warm water and dry all surfaces with chamois
leather.
All manuals and user guides at all-guides.com
washing the motorcycle. Never grease or lubricate the
brake discs. Loss of braking and further accidents may
occur. Clean the discs with an oil-free solvent.
Warning
Loss of braking may occur immediately after
E
83
Publicité
