AND UA-1010 Manuel D'instructions page 15

Recalling the Memory Data
Note: This device stores the last 90 measurements in memory.
1. Press the or
The average of all measurements and the
number of data are displayed.
(If no data, "0" is displayed. Press the
, or START button to turn the
device off.)
2. Each time the
button to display the data in the
reverse order) is pressed, the memory
data is displayed as follows.
Average of all AM (morning) measurements
taken between 4:00 and 9:59.
(In the example, 10 measurements. If
no data, "--" is displayed.)
Average of all PM (evening) measurements
taken between 18:00 and 1:59.
(In the example, 9 measurements. If
no data, "--" is displayed.)
Most recent data (No.n, in the
example, No.35)
Three seconds after the data number
display, the measurement data is displayed.
Last data (No.1)
Three seconds after the data number
display, the measurement data is
displayed.
3. After the last data is displayed, press
the button to return the average
display of all measurements.
4. Press the START button to turn the
device off. After one minute of
non-operation, the device will turn off
automatically.
All manuals and user guides at all-guides.com
button.
button (or the
English 13
Press or
Average systolic
Average diastolic
Average pulse
Average of
all the data
Average systolic
Average diastolic
Average pulse
Average
of AM data
Average systolic
Average diastolic
Average pulse
Average
of PM data
Most recent data
Last data (Oldest)
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse