Hypertherm Powermax45 Mode D'emploi page 3

Introduction
Purpose
This field service bulletin describes the steps necessary to replace the plastic base on the
Powermax45.
Tools and materials needed
Assorted Phillips

Pins, wires, or swabs with a 2 mm (0.09 inch) diameter

228258 Kit contents
Part number
001983
075711
110648
110662
110649
210210
Powermax45 Field Service Bulletin
All manuals and user guides at all-guides.com
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
All work requiring removal of the power supply cover must be performed
by a qualified technician.
See the Safety and Compliance Manual (80996C) for more safety
precautions.
and TORX screwdrivers
® ®
Description
Plastic base for Powermax45
Machine screw: M4 x 12
Data plate label (preapplied to base) that is specific to the
power supply configuration:
• 200 – 240 V CSA data plate
• 230 V CE/CCC data plate
• 400 V CE/CCC data plate
• 480 V CSA data plate
805830
Plastic Base Replacement
Quantity
1
6
1
3