Philips HF3650 Mode D'emploi page 20

English
20
Problem
The light wakes me too
late.
I am unable to turn the
Midnight Light function
on/off.
I am unable to stream
music via USB.
The AUX inlet doesn't
work properly.
Suddenly the device
makes a beeping sound.
Open-source and third-party software
Specifications
Adapter
Manufacturer
Type number
Rated input voltage
Rated input frequency
Rated output voltage
Rated output current
Rated output power
Solution
Perhaps the light intensity you have set is too low. Select a higher light
intensity. Perhaps the appliance is positioned at a lower level than your head.
Make sure the appliance is located at a height at which the light is not blocked
by your bed, comforter, blanket or pillow. Also make sure the appliance is not
placed too far away.
Make sure you tap on the correct position (top/back) of the appliance.
The USB connection is only for charging your mobile phone. You are not able to
stream music to the Sleep & Wake-Up Light.
Try to set the volume on your mobile phone either higher or lower. If necessary,
adjust the volume level on the appliance as well.
The backup alarm went off. The internal clock and the back-up alarm remain
active for at least 8 hours. If an alarm is due during this back-up period, it will
go off. The alarm sound stops automatically after approximately 30 seconds.
You also can stop the alarm sound immediately by connecting the appliance to
the power briefly.
To prevent the back-up alarm from going off when the power is disconnected
(e.g. during storage), disable the alarms before you disconnect the appliance
from the power.
*HF3653 does not feature a radio.
A copy of the open-source software and third-party commercial software
license agreement can be found on the website www.philips.com/support
Search for the device number HF3670 / HF3671 / HF3672 / HF3650 / HF3651 /
HF3652 / HF3653 / HF3654 on the technical documentation page of the
product.
PHILIPS
HF20
100 V – 240 V AC
50 / 60 Hz
24.0 V DC
0.75 A
18.0 W