Publicité
Les langues disponibles
Les langues disponibles
Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press and hold the
year starts blinking.
2. Select the year using the
Press the
SET
year and move to month/day selection. The
date can be set anywhere between the years
2013 and 2059.
3. Select the month using the
Press the
SET
month and move to day selection.
4. Select the day using the
Press the
SET
and move to hour/minute selection.
5. Select the hour using the
Press the
SET
hour and move to minute selection.
6. Select the minute using the
Press the
START
device off.
Holding down the
change the value continuously.
Note: After three minutes of non-operation, the
device will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
When using the device for the first time, the clock is not adjusted.
When the device is disconnected from the power supply, the set
date and time will be erased.
When the set date and time is erased, please adjust again.
All manuals and user guides at all-guides.com
Using the Monitor
button until the
SET
or
button.
button to set the current
or
button to set the current
or
button.
button to set the current day
or
button.
button to set the current
or
or
button to turn the
SET
or
button will
English 12
Press and hold
Year
or
Month
button.
or
button.
Minute
or
or
Day
Hour
or
or
START
Turn off
Pressing the
START
button will turn the
device off anytime.
Publicité
