Core Cooking Setting; Filling And Emptying The Well - Angelo Po 10NCP1IA Manuel D'utilisation

Manual cooking
Proceed as follows.
Press the key (F). The last value set appears on
1)
the display (A).
Press the keys (G-H) to increase or decrease
2)
the values shown on the display. The core
temperature increases or decreases by 1°C
every time keys (G-H) are pressed.
Press the key (F) again to start the cooking cycle
3)
The light (S) comes on.
Important
The basket automatically lifts when cooking
is complete.
Programmed cooking
Proceed as follows.
Repeatedly press the (F) key until the wanted
1)
core temperature appears on display (A) (up
to a maximum of 5 pre-set cooking times can
be recalled).
Press key (F) to start the cooking cycle.
2)
Important
The basket automatically lifts when cooking
is complete.
Modify program
Proceed as follows.
Repeatedly press the (F) key until the core
1)
GB
Filling
When the appliance is on, the well can be fi lled in
diff erent ways.
Quick fi lling
– Press the key (G) once; the light (M) comes
on. The cooking well automatically fi lls to the
maximum level.
Quick fi lling with top-up
– Press the key (G) twice; the lights (M-N) come
on.
The cooking tank automatically fi lls up to
maximum level with slow supply until the set
temperature is reached.
3329640_ut_GB

CORE COOKING SETTING

FILLING AND EMPTYING THE WELL

- 12 -
A
G
temperature to be modifi ed appears on
display (A).
Press the keys (G-H) to increase or decrease
2)
the values shown on the display. The core
temperature increases or decreases by 1°C
every time keys (G-H) are pressed.
Keep the key (E) pressed (about 5 seconds)
3)
until the buzzer sounds. The value on the
display will stop fl ashing.
Important
The value which was modifi ed is deleted
from the appliance's memory and the new
value set is saved.
Press key (F) to start the cooking cycle.
4)
M N
B
R
H S
P
Q G
ENGLISH
E
F