Equipment Decommissioning, Demolition And Disposal - Angelo Po 10NCP1IA Manuel D'utilisation

To carry out this operation, proceed as follows.
Turn off the gas supply tap and switch off the
1)
main electricity supply.
Open the hatch (A).
2)
Undo the screws (B) to remove the guard (C).
3)
GB

EQUIPMENT DECOMMISSIONING, DEMOLITION AND DISPOSAL

When decommissioning the appliance, a series
of procedures must be carried out to ensure
that the appliance and its components are not a
hindrance and are not easily accessible.
To ensure that the appliance cannot constitute
hazards for people or the environment, all ener-
gy sources (electricity, etc.) must be disconnect-
ed and rendered unusable, and any liquids pre-
sent must be drained (lubricants, fl uids, etc.).
Place the appliance in a suitable area which is
not easily accessible, with barriers to prevent an-
yone from accessing it.
3329640_inst_GB
REPLACEMENT OF THE BURNER NOZZLE
B
A
B
C
B
B
Undo the screws (D) and replace the ignition
4)
unit (E).
Once the operation has been completed,
5)
replace the guard (C) and close the hatch (A).
When scrapping, sort all components by chemi-
cal characteristics and dispose of them sepa-
rately in accordance with the relevant legal re-
quirements.
Important
Do not dump non-biodegradable products,
lubricating oils, and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in compliance with
the relevant laws.
- 18 -
D
D
E
ENGLISH