Levelling; Water Connection - Angelo Po 10NCP1IA Manuel D'utilisation

Adjust the fl oor-mounted feet (A) to level the
appliance.
Important
Those authorised to carry out the connection
operation must have experience acquired
and certifi ed in the specifi c sector, in accord-
ance with current legislation in the appli-
ance's installation country.
The connection must make to the proper
standards and must comply with all the rel-
evant regulations and legislation.
To make the connection, connect the mains
line to the appliance's connection pipe, fi tting a
shut-off tap (A), to allow the water supply to be
cut off when necessary.
Easily accessible fi lters must be fi tted down-
stream of the tap.
GB
Pressure
pH
TDS
Hardness
Index of Langelier (reccomended) (**)
Content of salts and metal ions
Requested
Reccomended (**)
(**) Values diff erent from these parameters may cause corrosion if combined with wrong use and environment.
3329640_inst_GB

WATER CONNECTION

Parameters to check

LEVELLING

Caution - Warning
The appliance must be supplied with drin-
king water having the characteristics shown
in the table.
200÷400 kPa (2÷4 bar)
7÷8.5
40÷150 ppm
3÷9°f (1,5÷5°d, 2.1÷6.3°e, 30÷90 ppm)
>0.5
Chlorine <0,1 mg/l
Chlorides <10 mg/l
Sulphates <30 mg/l
Iron <0,1 mg/l
Copper <0,05 mg/l
Manganese <0,05 mg/l
- 10 -
A
A
Value
ENGLISH