Publicité
Les langues disponibles
Les langues disponibles
bowl or jar and when you clean them. Their cutting edges are very
sharp.
caution
-
Never switch off the appliance by turning the blender jar, the bowl or
their lids. Always switch off the appliance by turning the speed
selector to 0.
-
Switch off the appliance before you detach any accessory.
-
Unplug the appliance immediately after use.
-
Always unplug the appliance before you reach into the blender jar
with your fingers or an object (e.g. a spatula).
-
Wait until moving parts stop running before you remove the lid of
the bowl or jar.
-
Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
-
Do not exceed the maximum level indication on the jar and the bowl.
-
Consult the table in this user manual for the correct quantities and
processing times.
-
Certain ingredients may cause discolourations on the surface of the
parts. This does not have a negative effect on the parts. The
discolourations usually disappear after some time.
-
Never fill the blender jar or food processor bowl with ingredients
hotter than 80ºC.
-
This appliance is intended for household use only.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
safety lock
Built-in safety lock
This feature ensures that you can only switch on the appliance if you
have assembled the blender jar or the bowl correctly on the motor unit
and the lid correctly on the blender jar or bowl. If the blender jar or bowl
All manuals and user guides at all-guides.com
and its lid are assembled correctly (see chapter 'Using the appliance'), the
built-in safety lock will be unlocked.
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter 'Cleaning').
using the appliance
general
-
The appliance is equipped with a built-in safety lock that prevents it
from functioning if the blender or food processor is not assembled
properly.
Food processor
1
Put the bowl on the motor unit (1) and turn it clockwise to fix it
() (Fig. ).
Note: The bowl is assembled correctly when the handle is directly above the
closed lock symbol.
Put the tool holder with the desired accessory in the bowl (blade
unit, kneading accessory, emulsifying disc, balloon beater, citrus
press or slicing/shredding disc). See the appropriate section below.
When you use the blade unit, the kneading accessory or the
balloon beater, put the ingredients to be processed in the bowl.
Note: Do not fill the bowl beyond the MAX indication.
4
Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it
('click') (Fig. ).
Note: Make sure the projection on the lid locks into the slot of the bowl
handle
5
When you use the disc, add the ingredients through the feeding
tube and push them down with the pusher.
EnglisH
7
Publicité
