Publicité
Les langues disponibles
Les langues disponibles
-
If food sticks to the wall of the blender jar, switch off the appliance
and unplug it. Then use a spatula to remove the food from the wall.
citrus press (HR7772 only)
You can use the citrus press to squeeze fresh fruit juices. Pulp, pips and
skins are removed from the juice.
1
Put the tool holder in the bowl (Fig. 9).
Put the citrus press on the tool holder in the bowl (Fig. 40).
Note: Make sure the projection on the sieve locks into the slot of the bowl
handle.
Select the speed that corresponds with the colour of the
accessory (Fig. 1).
4
Press the citrus fruit onto the cone (Fig. 41).
Note: Stop pressing from time to time to remove the pulp from the sieve.
Note: When you want to remove pulp from the sieve turn the speed selector
to 0 to switch off the appliance.
5
When you have finished processing, turn the speed selector to 0
and unplug the appliance (Fig. ).
cleaning
1
Make sure the appliance is switched off and unplugged.
Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap.
Clean the parts that have come into contact with food in hot water
with some washing-up liquid immediately after use.
Clean the blade unit of the food processor, the slicing/shredding disc,
the blade unit of the blender very carefully. The cutting edges are very
sharp.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
All manuals and user guides at all-guides.com
-
Make sure that the cutting edges of the blades and the slicing/
shredding disc do not come into contact with hard objects. This could
cause them to become blunt.
-
You can pull the beaters out of the balloon beater to clean them
separately.
Quick-cleaning the blender jar
1
Pour lukewarm water (not more than 0.5 litres) and some washing-
up liquid into the blender jar (Fig. 6).
Place the lid on the blender jar (1) and turn it clockwise to fix it
() (Fig. 7).
Select the speed setting that corresponds with the colour of the
accessory (Fig. 8).
4
Let the appliance run until the blender jar is clean or for 0
seconds.
5
Detach the blender jar and rinse it with clean water.
Balloon beater (HR7772)
Always clean the balloon beater immediately after use.
The balloon beater can be cleaned in the dishwasher. You can also pull the
beaters out of the balloon beater to clean them separately.
1
Pull the beaters out of the balloon beater housing. (Fig. 4)
To reassemble, push the beaters back into the balloon beater
housing.
citrus press
Always clean the citrus press immediately after use.
The citrus press can be cleaned in the dishwasher. You can also pull the
cone from the sieve to clean them separately.
1
Pull the cone from the sieve (Fig. 4).
To reassemble, push the cone back on the sieve of the citrus press.
EnglisH
11
Publicité
