shark RACE-R PRO GP 06 Manuel D'utilisation page 4

WARNING!
can
against all possible high or
low-speed shocks. To ensure
an efficient level of protection
however, the helmet must be
sized appropriately and the chin
strap adequately tightened, as
indicated in the manual. It is
hazardous not to use a correctly
sized helmet or not to sufficiently
tighten the chin strap closing
system since the helmet may
become
head in the event of an accident,
thereby causing serious or even
fatal injuries.
CHOOSE YOUR SIZE
Each helmet, sized from XS to
XL, has been designed for a given
head shape. To accurately measure
your head circumference, unroll
a tape measure horizontally at
a 2.5-cm distance above your
eyebrows. If the measurement
obtained lies between two sizes,
start by trying the smaller helmet.
4
No helmet
fully protect
detached from
Keep in mind that due to the wide
users
variation in skull shapes, these
references merely serve to guide
you to the size best adapted to
your particular head. To ensure
efficient protection, you'll need
to verify that the helmet fits your
head snugly. When choosing a
new helmet, be sure to verify that
your head slides all the way into
the helmet, with the top line of
the field of vision being positioned
above your eyebrows. Also ensure
the
that the chin strap is sufficiently
tightened,
following page.
1. The
enveloped by the helmet and the
cheek pads must provide adequate
support. Should this not be the
case, the helmet you selected is
too big, so try the next smaller size
(see Figure A).
2. With the chin strap appropriately
tightened, make sure the helmet
does not shift too much from left
to right and from top to bottom.
You should feel your skin stretch
as shown on
head must be
B
the
fully