shark RACE-R PRO GP 06 Manuel D'utilisation page 16

E-F - Replace the visor locker in closed
position to lock the visor.
WARNING! Do not force . Check the
movement of the visor before using
of the helmet.
ADJUSTMENT
OF THE FRICTION FORCE
1 - The 1.5mm six sides key enables the
adjustment of the friction force of your visor.
(see photo)
16
ADJUSTMENT
OF VISOR SEALING :
Your helmet has been carefully adjusted
in factory. You should better not modify
this adjustment; however the SHARK patent
rotation system gives the possibility to adjust
the visor. But we recommend you to contact
your retailer to make this operation.
WARNING! For your safety, do
not ride with a visor that does not
E
guarantee you a perfect visibility.
WARNING! If your visor after a
period of use, does not guarantee
you an excellent visibility, it is absolutely
necessary to change it.
TEAR OFF
Your helmet Race-R Pro GP 06 Could be
equipped with a tear off kit. Note that the
tear off are intend to be used only on a
closed track. The visor of Race-R Pro GP 06 is
F
equipped of the necessary supports.
ASSEMBLE : The supports are mounted
on eccentrics, swing them to have them
closer. Place the tear off on a clean visor
(see photo), once the tear off are positioned
on their supports, tension them by exerting
a rotation.
WARNING! The bad positioning of
the tear off can affect your vision and
cause risk of accidents.