shark RACE-R PRO GP 06 Manuel D'utilisation page 15

E - Pull out the visor from the rotation axis.
VISOR ASSEMBLY
A - Check that the lock cam rolls are well
in their housings and that the longest part
of the visor locks are toward the front of
the visor.
B - Insert the visor in its rotation axis and
push it backward until clipping.
D
B - Adjust the visor in intermediate position.
E
C - Press on the blocker to cling it on
the visor, then turn it backward a quarter
turn to bring it against the rotation axis
in initial position. Repeat the operation on
the other side.
A
B
C
D
15