shark RACE-R PRO GP 06 Manuel D'utilisation page 11

CHIN COVER
Your Race R Pro GP 06 is equipped with
an exclusive anti-turbulence flap made of
two elements (A), which gives you as much
insulation as possible from noise, aerodynamic
turbulence and cold.
1/ A first fixed part in neoprene fabric, which
provides a first level of protection.
2/ A second removable part, which provides
maximum insulation. To use only the fixed
flap, detach the 3 pressure fasteners from the
removable flap and withdraw it (B). To put it
back in place, simply reattach the 3 pressure
fasteners.
ANTI-FOG MASK
Small mask (summer)
ASSEMBLY: the small mask fixes onto the
helmet using a bayonet system. Put the mask
in front of the 3 support studs and insert them
in the housings as well as the straps (C).
Make a horizontal movement towards the
right (helmet opposite) to lock it (D). Finish
locking by pressing on the straps.
DISASSEMBLY: Make a horizontal movement
in the opposite direction as for assembly, then
extract the mask from the support studs.
2 2
1 1
A
B
C
D
11