Nilfisk Liberty SC50 UVGI Mode D'emploi page 5

KNOW YOUR MACHINE
As you read this manual, you will occasionally run across a bold letters in parentheses - example: (B). These numbers refer to an item shown on
this page unless otherwise noted. Refer back to this page whenever necessary to pinpoint the location of an item mentioned in the text.
A Bulb Life(hour countdown) Reset Buttons
B Bulb Status LED's
C Bulb Identification Number
A
CONFIGURATION
After installing the UVGI kit, on the machine, the Configuration setting for the "UVGI Kit" must be set to "Yes" in order to be able to operate.
OPTIONS
There is an option menu item "Scrub with UVGI" that allows the operator to set whether to always clean with UVGI. If selected "Yes", anytime
Scrub system is active, the UVGI module will be active. This includes manual cleaning and Autonomous cleaning.
7/2020
CONFIGURATION
Battery
Charger Algo
TrackClean
UVGI Kit
¢ back, $ select
OPTIONS
Language
Scrub with UVGI
Scrub Max
Solution
¢ back, $ select
56091240 - Nilfisk Liberty SC50 UVGI
INSTRUCTIONS FOR USE
B
AGM
Offline
Yes
Yes
English
Yes
Heavy
SmartFlow
ENGLISH - A
C
A - 5