Selecting A Base Station; Handset Identification; Base Settings; New Internal Number - Topcom Butler 5020 Mode D'emploi

Butler 5020
- Change the internal handset number (max 1 digits), INT. NO: (use the numerical keypad)
- Press OK to confirm.

5.13. Selecting a base station

If a handset is subscribed to different base stations, the different base set can be selected.
When you select 'AUTO SEARCH', the unit will search the base that has the best reception.
- Press MENU when the unit is in standby mode..
- Select SYSTEM by using the UP and DOWN keys.
- Press OK to confirm.
- Select SELECT BASE by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired base station or Auto search by using the UP and DOWN keys.
- Press OK to confirm.
- The handset will now be active on the selected base station

5.14. Handset identification

This setting allows you to identify the handset.
- Press MENU when the unit is in standby mode. .
- Select SYSTEM by using the UP and DOWN keys.
- Press OK to confirm.
- Select EQUIPMENT ID by using the UP and DOWN keys.
- Press OK to confirm.
- The display will show the identification code. This code can also be found on the sticker under the
battery cover.
- Press ESC to leave the setting.

6. BASE SETTINGS

6.1.

New internal number

To change the internal handset number:
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm
- Select NEW INTERN by using the UP and DOWN keys.
- Press OK to confirm.
- The free handset numbers are displayed.
- Enter the desired handset number
- You will return to the standby display and the new handset number will be displayed.
6.2.

Network operator prefix

If you enter a network operator prefix, the prefix will be dialled out before a telephone number starting
with 0.
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm
- Select ACCESS by using the UP and DOWN keys.
- Press OK to confirm.
- Select PRESELECTION by using the UP and DOWN keys.
- Press OK to confirm.
- Enter the desired prefix ( O = ) or use the C key to delete the entry.
59