Removing Subscription Of A Handset To A Base Station; Change The Assigned Name And Number From A Subscribed Base Station; Selecting A Base Station - Topcom Butler 5070 Mode D'emploi

All manuals and user guides at all-guides.com
Butler 5070
- Enter the Park Code, PARK?:
- Press NEXT to confirm.
- Enter the Base Pin Code, BASE PIN?: (standard 0000)
- Press OK to confirm.
- The display shows << WAIT >> until the handset has found it's base station.
If the handset does not find the selected base station, the handset will return to standby mode after 2
minutes.
If the PIN code is wrong, the display shows << FAIL >>. Press ESC to leave the setting.
- Enter a name for the handset, NAME: (use the alphanumerical keypad)
- Press OK to confirm.
The base station will automatically assign a handset number (1-5). This number will be showed on the
display as the assigned internal number.
- Press OK to confirm.
- If you want to leave the setting, press ESC for more than 2 seconds.

7.11. Removing subscription of a handset to a base station

When a handset is subscribed to multi base stations, you are able to remove the subscription of a speci-
fied unit. The active base station cannot be removed.
- Press MENU when the unit is in standby mode..
- Select SYSTEM by using the UP- and DOWN keys.
- Press OK to confirm.
- Select SUBSCRIPTION by using the UP- and DOWN keys.
- Press OK to confirm.
- Press OPT.
- Select DELETE by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired base station by using the UP- and DOWN keys.
- Press OK to confirm.

7.12. Change the assigned name and number from a subscribed base station

- Press MENU when the unit is in standby mode..
- Select SYSTEM by using the UP- and DOWN keys.
- Press OK to confirm.
- Select SUBSCRIPTION by using the UP- and DOWN keys.
- Press OK to confirm.
- Press OPT.
- Select EDIT by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired base station by using the UP- and DOWN keys.
- Press OK to confirm.
- Change the name of the base station, NAME: (use the alphanumerical keypad)
To remove a character, press C.
- Press OK to confirm.
- Change the internal handset number (max 1 digits), INT. NO: (use the numerical keypad)
- Press OK to confirm.

7.13. Selecting a base station

If a handset is subscribed to different base stations, the different base set can be selected.
When you select 'AUTO SEARCH', the unit will search the base that has the best reception.
82