Technical Specifications - Topcom Butler 5020 Mode D'emploi

Butler 5020
You can select Tone dialling with long or short flash time.
When you have enabled a setting, ✔ is displayed.
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm.
- Select SETUP by using the UP and DOWN keys.
- Press OK to confirm.
- Select DIAL MODE by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired setting by using the UP and DOWN keys.
(PULSE DIAL – TONE R: 300ms TONE R: 100 ms)
- Press OK to enable/disable the selected setting.
- The display shows ✔ (enabled)
- Press ESC to leave the setting.

7. TECHNICAL SPECIFICATIONS:

DECT=
GAP=
Frequency Range:
RF Channels:
Channel Bandwidth:
Modulation:
Transmission Output Power:
Antenna diversity supported Base-Station
Data Transmission Rate:
Speech Encoding:
Communication Range:
Power Supply:
Base Station:
Handset:
Operating Time:
Operating Temperature:
Storage Temperature:
Dimension:
Weight:
Digital Enhanced Cordless Telecommunication
Generic Access Profile
1880~~1900MHz (BW=20MHz)
1920~~1940MHz (BW=20MHz)
10 Channels
1.728 MHz
GFSK
10Mw
1.152 Mbps
ADPCM ( 32K bps )
OUTDOOR 300 Meters INDOOR 50 Meters
INPUT AC110 / 230 VAC 60Hz / 50Hz
OUTPUT DC 6.5 V 270mA / DC 7.5V 210mA
Ni-Mh Rechargeable Battery 1.2V AAA* 3
Standby 80 Hours Talk : 8 Hours
0° To 40°C
-20° To 60°C
Handset: 135 x 51 x 29 m/m L/W/D
Base Station: 179 x 141 x 42 m/m L/W/D
Charger: 80 x 60 x 110 m/m L/W/D
Handset: 150g ( Approx )
Base station: 400g ( Approx )
Charger: 80g ( Approx )
62