Removing A Handset; Setting Up A Handset On Another Base; Selecting A Base - Topcom Butler 2505 Mode D'emploi

Butler 2505/2510

6.2 REMOVING A HANDSET

You can remove a handset with a base to allow another handset to be registered
1. Enter the menu by pressing
2. Select setup using the
3. Press OK
4. Select DEL HS using the
5. Press OK
6. Enter the 4 digit base PIN code
7. Press OK
8. Select the handset to be removed
9. Press OK to validate

6.3 SETTING UP A HANDSET ON ANOTHER BASE

If you want to use a Butler 2505 or Butler 2510 handset with a base of another model. The base must
be GAP compatible.
1. To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 10 from the paragraph 6.1.

6.4 SELECTING A BASE

The handsets can be registered up to 4 bases simultaneously.
To select a base:
1. Enter the menu by pressing
2. Select SETUP using the
3. Press OK
4. Select SEL BASE using the
5. Press OK
6. Select a base or select AUTO using the
7. Press OK
When selecting the base, the currect selected base in indicated by a 'o' sign after the base number. If
you select 'Auto' the handset will automatically search for another base when you are out of range!
/OK
and keys
and keys
/OK
and keys
and keys
and
83
keys