Bitzer CT-120-2 Traduction De La Notice D'origine page 67

11 Devices that are no longer available
11.1 SE-B1
• The SE-B1 compressor protection device is no longer available.
• It is replaced by:
– SE-B3 with a supply voltage of 110 .. 240 V
– SE-B2 with a supply voltage of 24 V
– SE-B5 if compliance with EN/UL 60730 is required
• For technical data, see Overview table .
11.2 SE-B4
• The SE-B4 compressor protection device is no longer available.
• For technical data, see Overview table .
11.3 SE-E1
• The SE-E1 compressor protection device will soon no longer be available / phased out and replaced by SE-E4 .
• For technical data, see Overview table .
11.4 SE-E2
• The SE-E2 compressor protection device is no longer available and is replaced by SE-E5 .
• For technical data, see Overview table .
11.5 SE-E3
• The SE-E3 compressor protection device is no longer available and is replaced by SE-E4 .
• For technical data, see Overview table .
11.6 SE-C1
• The SE-C1 compressor protection device is no longer available. It has been replaced by SE-i1 .
• For technical data, see Overview table .
• For further information, see Technical Information ST-121.
11.7 SE-C2
• The SE-C2 compressor protection device is no longer available. It has been replaced by SE-i1 .
• For technical data, see Overview table .
• For further information, see Technical Information ST-121.
11.8 SE-G1
• This compressor protection device will soon no longer be available / phased out and replaced by SE-G4 .
• For technical data, see Overview table .
CT-120-2 // PDF Download 67