Troubleshooting - KitchenAid KDRP407H Guide D'utilisation Et D'entretien

PROBLEM POSSIBLE CAUSE
Burners spark It is normal for all four
burners to spark when a
burner is turned on, but has
not yet ignited.
Continuous sparking may be
caused when:
—There is a faulty spark
—The wall outlet wiring is
The surface You are not pushing in
burner controls before turning.
will not turn
Cooling fan runs It is normal for the fan to
during BAKE, automatically run while the
CONVECT oven is in use to cool the
BAKE, CON- electronic control.
VECT ROAST,
BROIL, CON-
VECT BROIL or
CLEAN
The convection It is normal for the
fan does not convection fan to shut off
run all the time
when the door is opened.
The Self- You have programmed a
Cleaning cycle
delayed start time.
will not operate
An "F" code appears on the
display.
Odor from oven
Heating of insulation.
module.
incorrect.
T
roubleshooting
WHAT TO DO
No action is needed. Burner
operation is not affected and the
sparking should end when the knob
is moved from LITE.
Contact service technician to replace
module.
Contact a qualified electrician to
correct wiring, if needed.
Push control knob(s) in before
turning to a setting.
No action is needed.
Wait for the start time to be reached,
or cancel and reset the control.
Call a service technician to repair.
Odors are normal when the range is
new. The odors will disappear as the
oven is used.
continued on next page
31