Delivery Content - VOLTCRAFT GT-6000 Notice D'emploi

Using this product for purposes other than those described above may damage the product and result in a short-
circuit, fire or electric shock. The product must not be modified or reassembled!
Read the operating instructions carefully and keep them in a safe place for future reference.
Always observe the safety information in these instructions.

4. Delivery content

• Device tester GT-6000
• 1 test lead with alligator clip
• 1 IEC power cable (IEC adapter cable IEC 60320 C13)
• 1 mains cable (IEC 60320 C19)
• 1 USB-C connection cable (USB-A connector to USB-C socket)
• 6 AA batteries,1.5 V (type AA/LR6)
• 1 lithium button battery (CR2032)
• Pouch
• Operating instructions
Optional accessories:
Passive measurement adapter:
Measurement adapter for single and three-phase loads (passive, without mains voltage-dependant switching de-
vice) for R , R (insulation resistance) and I (alternative leakage current) measurements. Commercially available
PE ISO EA
measurement adapters with the following connections can be used:
16 A CEE connector (5-pin, L1, L2, L3 are bridged) --> earthing contact connector
Active measurement adapter:
Measurement adapter for three-phase loads (active, with mains voltage-dependant switching device) for R and I
PE PE
measurements (direct measurement) under operating conditions:
16 A CEE adapter (5-pin), active
The active measurement adapter can be obtained using item no. 2267357.
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
41