Seca 704s Mode D'emploi page 41

9. TROUBLESHOOTING
Problem
... the measurement is
not a plausible height?
10.SERVICING
11.TECHNICAL DATA, MEASURING ROD
11.1 General technical data
Dimensions
• Depth
• Width
• Height (retracted)
• Height (extended)
Net weight
Ambient conditions, operation
• Temperature
• Air pressure
• Humidity
Ambient conditions, storage
• Temperature
• Air pressure
• Humidity
Ambient conditions, transport
• Temperature
• Air pressure
• Humidity
Cause/solution
Measured result read off incorrectly
- Use the correct read-off edge for the current
measuring range
- Read off decimal places for the current
measuring range in the correct direction
Patient in wrong position/posture
- Correct patient's position/posture
The seca measuring rod does not require any servicing.
However, if anything ever fails to work, contact an
authorized service partner.
You can find a service partner in your area at
www.seca.com or by sending an e-mail to
service@seca.com
General technical data
+10 °C to +40 °C (50 °F to 104 °F)
-10 °C to +65 °C (14 °F to 149 °F)
-10 °C to +65 °C (14 °F to 149 °F)
approx. 1 kg
700 hPa - 1060 hPa
30 % - 80 %, no condensation
700 hPa - 1060 hPa
0 % - 95 %, no condensation
700 hPa - 1060 hPa
0 % - 95 %, no condensation
Troubleshooting • 41
English
37 mm
57 mm
1324 mm
2320 mm