Seca 704s Mode D'emploi page 40

7.3 Sterilizing
8. FUNCTION CHECK
40 •
Interval
Before
Each
measurement
After
Each
measurement
As required
This device may not be sterilised.
►
Perform a function check prior to each use.
A complete function check includes:
• visual inspection for mechanical damage
• checking the alignment of the device
• visual and function check of the display elements
• function check of all the controls shown in the
section entitled "Overview"
• function check of optional accessories
If you notice any faults or deviations during the function
check, first try to resolve the error with the aid of the
section entitled "What do I do if ..." in this document.
Component
• Weighing platform
• Head slide with measuring flap
• Weighing platform
• Head slide with measuring flap
• Column and display head of scale
• Telescopic elements of the stadiometer
• Measuring flap extension (if present)
CAUTION!
Personal injury
If you notice any faults or deviations during the
function check which cannot be resolved with
the aid of the section entitled "What do I do if
..." in this document, you may not use the
device.
►
Have the device repaired by seca service or
by an authorized service partner.
►
Follow the section entitled "Servicing" in this
document.