Seca 704s Mode D'emploi page 26

Measuring rod
2.3 User qualification
Assembly
Operation
26 •
The scale functions of the
cal to those of the
seca 703
mation about this in the instructions for use supplied for
the model.
seca 703
The measuring rod for the
attached to the scale in such a way that the patient's
height can be measured while he or she is standing on
the weighing platform.
The measuring rod consists of two telescopic elements:
• lower telescopic element:
measuring range 60 cm -130.5 cm
• upper telescopic element:
measuring range 130.5 cm -200 cm
The scales are on opposite sides of the telescopic
elements.
The head slide is latched in the upper telescopic ele-
ment and can be released for measurements on the
lower telescopic element. The measuring flap of the
head slide can be folded down.
Use the measuring station only for the purpose quoted
in the section entitled "Intended use".
Devices that are shipped partially assembled may only
be mounted by sufficiently qualified persons such as
specialist dealers, hospital technicians or seca service
technicians.
The device may only be operated by healthcare
professionals.
model are identi-
seca 703s
model. You can find infor-
models is
seca 704s/703s