Progress PI1540X Notice D'utilisation page 29

Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Make sure that the programme marker
on the knob is aligned with the on/off in-
dicator.
2. Press and hold the delay button. At the
same time turn the knob counterclock-
wise until the first programme is aligned
with the on/off indicator.
3. Release the delay button when the start
indicator and the on/off indicator start to
flash.
4. Press the delay button.
•
starts to flash.
Water hardness
French mmol/l
degrees
(°fH)
84 - 90 8.4. - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
• The start indicator and the on/off indi-
cator continue to flash.
• The intermittent flashing of
to the current set level, e.g. 5 flashes
+ pause + 5 flashes = level 5.
5. Press the delay button again and again
to change the setting. Each time you
press the delay button the level number
increases.
6. To confirm the setting and deactivate
the appliance, turn the knob until the
programme marker is aligned with the
on/off button.
progress 29
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
2)
1
refers