FALMEC Modula M1 Mode D'emploi page 55

OPERATION AND
USE OF THE COOKTOP
When a cooking are is turned on, the bottom of the saucepan heats.
The cooking area only heats thanks to the heat given by the saucepan.
The cooktop automatically detects the size of the saucepan.
The heating power is to be chosen based on what shall be cooked.
Please find below a short table:
SETTING AREAS
1 - 2
Melt
Heat
2 - 3
Whisk
Defrost
3 - 4
Steam
4 - 5
Boil
6 - 7
Cook over a low heat
7 - 8
Cook
Fry
9
Fry, bring to the boil
P
Fry, bring to the boil
Remark: heating time of cooktops is shorter than the gas cookers.
BASIC FUNCTIONS
See table of the corresponding model in the previous page.
BRIDGE FUNCTION
This function allows for the simultaneous operation of the 2 cooking areas
To enable:
- Enable the cooktop;
For "Induction 2Z":
press simultaneously the symbols
(solo
display
- the symbol destro) will be displayed on the screen of the front cooking area;
- Push the keys + and – to set power.
For "Induction 2Z Plus":
press simultaneously the symbols
(solo
display
- the symbol will be displayed on the screen of the back cooking area; destro)
- Set the power with the slider of the front cooking area.
DEACTIVATION of the BRIDGE function:
For "Induction 2Z":
press simultaneously the symbols
For "Induction 2Z Plus":
press simultaneously the symbols
BOOSTER FUNCTION
The Booster strengthens power, so that big quantities can be heated (e.g. water to cook
pasta).
This power increase is enabled for max. 10 minutes.
For "Induction 2Z":
- Turn on the cooker;
- select the cooking area;
- touch (+) until on the screen is displayed on the back cooking area.
Booster Activation
For the back cooking area, it is possible to enable a double booster:
- touch the key (+) until is displayed the symbol
Sauces, butter, chocolate,
gelatine
Precooked dishes
Rice, pudding and cooked
dishes
Vegetables, fish, frozen food
Vegetables, fish, meat
Boiled potatoes, soups, pasta
Fresh vegetables
Meat, liver, eggs, sausages
Goulash, rolate, tripe
Potatoes, donuts, cakes
Steaks, omelettes
Boil
Bring to the boil big
quantities of water
+ :
:
+ .
.
(solo
+
display
.
destro)
For "Induction 2Z Plus":
- Turn on the cooker;
- touch the slider to bring power to
At the end of the Booster mode, power is automatically reduced to
KEEP WARM FUNCTION
Version "Induction 2Z"
42°C - Keeping temperature of cooked dishes:
Turn on the cooker;
Select the cooking area;
Touch the key (+) : the symbol is displayed
Version " Induction 2Z Plus"
Turn on the cooker;
Touch the key regarding the concerned cooking area and select one of the 3 levels
of temperature:
42°C - Keeping temperature of cooked dishes
70°C - Keep on cooking ;
94°C - Bring to the boil ;
Shutdown of the cooker
To shutdown the cooking area:
Touch the key ( - ) until 0 is displayed on the screen of the cooking area.
If the cooking area is still too hot, the residual heat is specified
Turn off the cooker
Touch the key : all cooking areas are deactivated.
On the display of the cooking areas that are still too hot, the symbol is displayed
Do not touch the cooking areas until the lamp
TIMER FUNCTION
AND AUTOMATIC SHUTDOWN
The timer has two functions:
1 – TIMER;
2 – AUTOMATIC SHUTDOWN of one or more cooking areas.
It is possible to set the duration up to 99 minutes.
Once the time set is over, on the display regarding time 00 is shown and a sound warn-
ing is activated that can be deactivated pushing keys (+) or (-).
TIMER
Timer can be used with the cooker being on and off.
To set:
1. Press simultaneously the keys (+) and (-).
(on the premium version the lamp is on
2. Set the desired time touching keys (+) and (-).
Timer starts passing.
To modify time repeat the procedure from point 1.
To cancel timer:
1. Press simultaneously the keys (+) and (-).
(on the premium version the lamp is on
2. Touch the key ( - ) to bring time to 00.
AUTOMATIC SHUTDOWN
For the automatic shutdown function:
1 - turn on the cooker;
2 - select the cooking area;
3 - select the level;
4 - set the timer as described above.
To set the automatic shutdown for another cooking area, repeat the procedure from
point 2.
TIMER and AUTOMATIC SHUTDOWN can be used simultaneously.
11
and then the key (+).
.
.
;
.
is on.
);
).
.