Atlas Copco PZB09-L-AR500-20 Mode D'emploi page 3

PZB09-L-AR500-20
Technical data
Technical data
Ordering No
Model
Air consumption at free
speed
Air consumption at free
speed
Air consumption at max out-
put
Air consumption at max out-
put
Braking torque
Braking torque
Built in brake
External parts material
Free speed
Max output
Max output
Min starting torque
Min starting torque
Ratio
Rotation direction
Shaft loading code
Shaft type
Speed at max output
Stall torque
Stall torque
Torque at max output
Torque at max output
Vane type
Weight
Weight
Inlet hose
Inlet hose
Ingress protection rating
Outlet hose
Outlet hose
Declarations
EU DECLARATION OF INCORPORATION
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
Machinery Directive 2006/42/EC:
2006/42/EC (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
8411409018
PZB09-L-AR500-20
l/s
cfm
3 l/s
6.4 cfm
Nm
ft lb
Hardened steel/Aluminium
r/min
0.09 kW
0.12 hp
5 Nm
3.7 ft lb
Reversible
a
Keyed
350 r/min
5 Nm
3.7 ft lb
2.5 Nm
1.85 ft lb
1.2 kg
2.6 lb
6 mm
0.25 in
IP65
6 mm
0.25 in
© Atlas Copco Industrial Technique AB - 9834 5358 00
And that this partly completed machinery is in conformity
with the provisions of the following other EU Directive(s):
2014/34/EU (ATEX)
This partly completed machinery must not be put into service
until the final machinery into which it is to be incorporated
has been declared in conformity with provisions of the Ma-
chinery Directive 2006/42/EC, where appropriate.
The following (parts/clauses of) European harmonized stan-
dards have been applied:
EN 1127-1:2019, EN ISO 12100:2010, EN ISO
80079-36:2016, EN ISO 80079-37:2016
The relevant technical documentation was compiled and was
communicated in accordance with Machinery Directive
2006/42/EC part B of Annex VII and ATEX Directive
2014/34/EU Article 13 (1) b) ii in the Notified Body ExVeri-
tas ApS (EU Identification No 2804) in Denmark. Authori-
ties can request the technical file for ATEX Directive
2014/34/EU in paper form from:
https://www.exveritas.com/2022/02/02/what-you-need-for-
atex-and-ukca-explosive-atmosphere-certification-for-the-uk-
and-eu-markets/
Stockholm, 2 May 2022
Carl von Schantz, Managing Director
Signature of issuer
Regional requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so called Substances
of Very High Concern (the "Candidate List"). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that cer-
tain mechanical components in the product may contain lead
metal. This is in compliance with current substance restric-
tion legislation and based on legit exemptions in the RoHS
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
Safety Information
www.P65Warnings.ca.gov
3