Synapse Biomedical TransAeris Manuel De L'utilisateur page 71

9.1.3 INTENsity Function
To adjust or modify the stimulus intensity:
• Press and hold the Unlock button then press the 1, 2, 3, or 4 button to choose one
or more channels to modify.
• Press and hold the Unlock button then press the INTEN button; "PULSE INTENSITY"
will be underlined to show it is enabled.
• Press and hold the Unlock button then press the increase or decrease to the
desired setting.
9.1.4 FREQuency Function
To adjust or modify the stimulus frequency of the output of the stimulator:
• Press and hold the Unlock button then press the FREQ button; "FREQ" will be
underlined to show it is enabled.
• Press and hold the Unlock button then press the increase or decrease to the
desired setting.
Figure 21 – TransAeris Intensity Function
Figure 22 – TransAeris Frequency Function
71 29