Synapse Biomedical TransAeris Manuel De L'utilisateur page 66

• (The blue connector will be placed on the LEFT side of the patient and the green
connector will be placed on the RIGHT side of the patient.)
• Confirm that the LOCK slide switch to the left, as shown in Figure 16 to the
Unlock position.
Insert each of the two electrodes into each of the two electrode inputs in the FrictionLoc
connector until it stops.
• Slide the LOCK switch to the right, as shown in Figure 17 until it clicks.
• Excess electrode length may be looped in a figure 8 pattern around FrictionLoc hooks.
24
66
FrictionLoc
Connector
Figure 14 - FrictionLoc Connector with Surface Electrode
Slide switch to the Left
to the Unlock Position
Figure 15 - FrictionLoc Connector
Figure 16 – Electrode Insertion
Surface Electrode
Insert Electrode
Into Inputs