Placement During Use - Synapse Biomedical TransAeris Manuel De L'utilisateur

Slide Switch to
Unlock Position
• Remove the percutaneous electrodes from the FrictionLoc connector.
• Remove the FrictionLoc connector from the surface electrode.
• Dress the percutaneous electrodes appropriately. Coil the electrodes, cover the exposed
leads and keep them close to the body so they do not get caught on anything.

8.4 PLACEMENT DURING USE

When the TransAeris is in use, place it in an area that reduces potential unauthorized access
from patient interaction or tampering by non-medical personnel.
• Verify that the stimulator is directly observable by medical staff.
8.4.1 Cleaning Prior to Use
During normal use, the TransAeris stimulator and cables may become soiled with blood or
body fluids. Verify that the TransAeris stays clean during use per hospital facility procedure.
Please refer to section 14.1 of this manual for cleaning instructions.
68 26
Release Button
Figure 18 - Unlock FrictionLoc connector