Publicité
Les langues disponibles
Les langues disponibles
CONTROL OVERVIEW
CHANNEL SETUP - OUTPUTS
1.
Name of Output A
Enter a name for Multifunction Output A (shown on Home
Screen).
2.
Function - Output A
Select a function for Multifunction Output A. Default
function of this output is Master.
3.
Name of Output B
Enter a name for Multifunction Output B (shown on Home
Screen).
4.
Function - Output B
Select a function for Multifunction Output B. Default
function of this output is Master.
22
1
2
3
4
OUTPUT DEFINITIONS
Definitions:
•
Not Used - always off.
•
Aux Power - always on.
•
Master - off in hold.
•
Run/Hold Only - on in Run - unaffected by sections.
•
Relief - on in hold.
•
Fixed Flow (Fixed Flow Trigger) - on when the flow
per minute reaches a specified fixed total flow rate.
Proportional Flow (Proportional Flow Trigger) - on
when the flow per minute reaches a specified flow rate,
proportional to active sections.
•
Flush - on when Hold is detected and remains on for a
specified time period.
ADDITIONAL PARAMETERS
•
Fixed Flow and Proportional Flow Outputs require a
Threshold value input. The data entry box will appear
when feature is chosen from the function list.
•
Flush Output requires value inputs for Flush Time and
Flush Delay. The data entry boxes will appear when
feature is chosen from the function list.
•
Flush Time - duration of flush cycle.
•
Flush Delay - adjusts a time delay from the RUN/
HOLD transition to the start of the flush cycle.
HYP1100 (01-15-23)
Publicité
