Mettler Toledo IND231 Manuel D'installation page 21



2.4.1.1. Enclosure Opening Assignments
The Figure 2-13 shows the openings in the IND231 enclosure.
Figure 2-14 shows the openings in the IND236 enclosure and Table 2-2 indicates the assignment
of each opening.
30094756 | 04 | 02/2021
Table 2-1: Gland, Grommet and Cable Sizes
Grommet
None
Small grommet
When making cable terminations inside the enclosure, ensure that the cable length from the
terminal strip/connector to the terminal housing is sufficient so that no strain is placed on the
connector assembly when the housing is in the fully open position.
After making the wiring connections described in the next section, ensure that the nut on the
cable gland is tightened properly to seal around the cable. The seal must be watertight.
1
Figure 2-13: IND231 Enclosure Openings
1
2
Figure 2-14: IND236 Enclosure Openings
Table 2-2: Connectors and Cable Gland Assignments
Position Standard connection
1 AC Power Cord
Cable Diameter
IND231
Load Cell Cable Gland
4–8 mm
3–6.5 mm
2 3
Assignment
Optional connection
METTLER TOLEDO IND231/IND236 Installation Manual
IND236
Option Cable Gland
5–10 mm
4.5–6.8 mm
4
4
3
-
2-7