Mettler Toledo IND231 Manuel D'installation page 18

3. Mark the position of the bracket mounting holes on the surface to which the terminal will be
4. The hardware to mount the terminal bracket is not included with the terminal—it must be
2.3.2. IND236 Mounting
2.3.2.1. Desktop Mounting
When the IND236 terminal will be mounted on a flat surface, an optional desktop mounting bracket
(PN: 22021070) is available for purchase.
2-4 METTLER TOLEDO IND231/IND236 Installation Manual
Figure 2-6: Adjusting the Bracket for Mounting on Wall or Column
mounted using the dimensions shown in Figure 2-7, or by holding the terminal up to the
surface and marking through the bracket holes.
Figure 2-7: Hole Pattern Template for Mounting Brackets
supplied locally. Ensure that the mounting hardware is capable of supporting four times the
weight of the terminal, which is approximately 2.0 kg (4.4 lb). Using the locally supplied
hardware, secure the terminal bracket to the surface.
Figure 2-8: IND236 with desktop mounting Brackets
30094756 | 04 | 02/2021