AMATECH Legholder Maquet-Matic I-LHMM Instructions D'utilisation page 12

INSTRUCTIONS FOR USE
2.6 Residual risk:
This product complies with relevant performance, safety standards. However, user
or patient harm from device, function, or mechanical hazards cannot be
completely excluded.
3 Equipment Setup and Use:
3.1 Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.
c. Assess the patient for pre-existing conditions that might preclude the use of
stirrups, such as recent hip surgery.
3.2 Setup:
a. Attach each side of the
Maquet-Matic by sliding the
square table mount bar into
the square
Maquet-Matic mount. Adjust
the stirrup so that the top of
the calf portion of the boot is
at the patient's mid-calf.
Tighten Knob #1.
b. Place the patient's legs into
the stirrups by holding the
heel with one hand and lifting
underneath the knee with the
other. It is recommended
that the legs be placed into
the stirrups simultaneously.
Document Number: 80028219
Version: C
hole of the
Page 12
# 1
Ref Blank Template: 80025118 Ver. E
# 2
Issue Date: 10 AUG 2021