Publicité
Les langues disponibles
Les langues disponibles
The storage battery gets flat
too
fast
during
use,
recharging with an electronic
battery-charger is too fast and
at the end the storage battery
gives the right voltage (about
2,14V for each empty element),
but it turns out to be not
uniformly charged when tested
with densimeter
After
recharging
with
electronic battery-charger the
storage-battery does not show
the
correct
voltage
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter
After
recharging
with
electronic battery-charger the
storage-battery does not show
the
correct
voltage
2,14V for each empty element)
and only one or few elements
turn out to be flat when tested
with densimeter
• the storage battery, already
filled
with
the
Manufacturer, has been stored
for a too long time before being
recharged and used for the first
time
an
• the storage battery has not
been connected to the battery-
charger
(about
• the battery-charger and the
power
socket to which the
storage battery is connected are
not compatible
• the battery-charger has not
been installed correctly
• the battery-charger does not
work
an
• one or more elements are
damaged
(about
• if the recharging with a
acid
by
the
normal storage-charger is not
effective, it is necessary to
carry out a double recharging
consisting in:
- a slow recharging of about
10 hours with a current equal
to 1/10 of the rated capacity
expressed in 5 hours (ex.: for
a storage battery of 100Ah(5),
the current should be 10A,
realized by a manual battery-
charger);
- one-hour pause;
- charging with a normal
battery-charger
• connect the battery-charger
to
connector
• check that the power supply
characteristics indicated on
the battery-charger plate are
compliant with those of the
mains
• taking into account the actual
voltage
socket,
connections
transformer primary circuit in
the
correct (at this purpose read
the manual to the battery-
charger)
• check that there is voltage at
the battery-charger, that the
fuses are not interrupted and
that there is current at the
storage battery; in addition
try to charge by means of
another
battery-charger
work,
service staff communicating
the serial number of the
battery-charger
• replace, if possible, the
damaged
monoblock storage batteries
at 6V or 12V, replace the
whole storage battery
the
storage
battery
available
at
the
check
that
the
of
the
battery-charger
are
rectifier:
if
the
does
not
call
the
after-sales
elements.
For
ENGLISH
27
Publicité
