IPC Gansow Ct100 Manuel D'instructions page 46

Do not put the hands in between moving organs.
Do not use detergents different from those provided for, and stick to the instructions
indicated on the respective safety sheets. Keep detergents in a safe place, inaccessible
to children, and in case they come in contact with the eyes, wash them immediately with
plenty of water or, if swallowed, call for a doctor immediately.
Make sure that the plugs for the power supply of the models with cable or of the battery-
chargers are properly grounded and protected by magnetothermal switches and
differentials.
Make sure that the electric characteristics of the machine (voltage, frequency, absorbed
power) indicated on the identification plate (fig. 1), are compliant with those of the power
distribution plant. The machine with cable is equipped with three lead wires and a three-
contact ground plug for the use of a proper grounding plug. The yellow and green wire of
the cable is the earth wire: never connect this wire to other wires that are not the plug
ground tap.
It is fundamental to observe the battery Manufacturer's instructions and stick to the
Legislator's provisions. Keep batteries always dry and clean to avoid surface leakage
currents. Keep batteries safe from impurities, for instance metal dust.
Do not lay tools on batteries: danger of short circuits and explosions.
Mind the use of battery acid: stick to the relative safety instructions.
When using the machine model with cable mind that you do not crush or tear the power
supply cable. Check this cable periodically to control if it is damaged; if this is so, the
machine cannot be used.
In presence of particularly high magnetic fields assess the possible effects on the control
electronics.
Never wash the machine with jets of water.
The recycled fluids contain detergents, disinfectants, water, organic and inorganic stuff
recycled during the work stages: they must be disposed of in compliance with the laws in
force.
In case of breakdown and/or bad operation of the machine, switch it off immediately
(unplugging it from the mains) and do not tamper with it. Contact a technical assistance
centre of the Manufacturer's.
All maintenance operations must be performed in adequately lighted environments and
only after having disconnected the machine from the power supply (in models with cable
by unplugging the machine from the socket, while in models with battery by detaching the
battery connector).
Have any electrical work and all maintenance and repair operations (particularly those not
explicitely described in this manual) carried out a specialised and trained technical staff
only.
In case of replacement of the power supply cable, plug or terminals, perform the repair by
properly fixing the electric connections and the cable blocking strap that is located in the
control panel, to guarantee the resistance of the cable. Then reassemble the panel with
care to ensure the protection of the machine user.
Only the use of original accessories and spare parts supplied by the Manufacturer is
permitted, as only these offer the certainty that the machine will operate safely and
without any inconveniences. Do not use parts removed from other machines or other kits
as spares.
This product is classified as RAEE type special waste and is covered by the requisites of
the new environmental protection regulations (2002/96/CE RAEE). It must be disposed of
separately from ordinary waste in compliance with current legislation and standards.
Special waste. Do not dispose of with ordinary waste.
ENGLISH
8