Explanation Of Symbols; Operating Manual; Overview; Charging The Power Pack - APA 16477 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Only used the supplied accessories to charge the power pack.
Never attempt to jump-start a vehicle when the battery is frozen, as this brings a risk of explosion.
Store these instructions carefully and, if necessary, pass them on to other users.

5.Explanation of symbols

Complies with EC directives
Labelled electrical products may
not be disposed of in the household
waste
Devices with this symbol may only be
operated indoors (dry environment)

6. Operating manual

6.1 Overview

1 Power pack
2 Switch
3 Charging status display
4 Jump lead connection
5 1 A USB connection
6 2 A USB connection
7 Charging socket
8 LED light

6.2 Charging the power pack

6.2.1 Charging the power pack with the plug-in charger

Plug the coaxial connector of the plug-in charger (Position 11 in the overview) into the charging socket of the
power pack (Position 7 in the overview). Next, plug the charger into a 230 V power socket. If you have to charge the
power pack but are unable to supervise it, place it on a fireproof surface during charging (stone, tile or metal plate).
Remove all flammable objects within a 1 m radius.
During charging, the control lights on the charging status display (Position 3 in the overview) will flash one after
another; the number of control lights which stay lit shows the charging status of the power pack. If charging is
complete, all control lights will go out.

6.2.2 Charging the power pack with the motor vehicle charging cable

Plug the coaxial connector of the motor vehicle charging cable (Position 12 in the overview) into the charging
socket of the power pack (Position 7 in the overview). Now connect the cigarette lighter plug to the 12 V socket of
your vehicle.
ATTENTION: Only charge the power pack with the motor vehicle charging cable when
driving or when the motor is running, otherwise there is a risk that the starter battery of
your vehicle may be discharged.
During charging, the control lights on the charging status display (Position 3 in the overview) will flash one after
another; the number of control lights which stay lit shows the charging status of the power pack. If charging is
complete, all control lights will go out.
9 19 V DC connection socket
10 12 V DC connection socket
11 Plug-in charger
12 Motor vehicle charging cable
13 Jump lead
14 USB 3-in-1 cable
15 Adaptor cable
16 Adaptor set
Insulated housing (protection class II)
Read the operating instructions
Polarity of the plug connector
Image 1: Overview
9

Publicité

Table des Matières
loading

Table des Matières