Brandt EASY COOK Mode D'emploi page 2

99626453_ML_A.qxd 17/09/03
Advantages and operating method
A
1. dvantages and working principle
The "EASY COOK" feature means you no longer have to set the temperature or
the cooking method.
Your oven automatically works these out for you to give the best results.
The "EASY COOK" method is done in two stages once the type of food has been selected:
1) Input. The oven uses its electronic scanners to record the cooking details of
each food you want to cook.
You will notice the oven carrying out this operation because the right-hand end of the
display panel will flash. This may take between 5 and 40 minutes to complete.
DO NOT OPEN THE OVEN DOOR DURING THIS STAGE: it will give a faulty reading.
2) Calculation. The oven works out the cooking time required. The AUTO symbol
appears on the display panel. The oven shows the amount of cooking time remai-
ning as well as the actual time of day it will finish. If you want to open the door
to rearrange the food, add more liquid etc, you can (only once the AUTO sign
appears).
3) The time displayed for cooking may be adjusted by the oven during cooking
and the end result may vary by a few minutes compared to the initial time given.
4) When cooking finishes a series of beeps is heard.
I
2. nstructions for use
ALL COOKING IS DONE WITHOUT PREHEATING THE OVEN
C
a) ooking straightaway:
Set the selector to "EASY COOK".
In the display, you will see a selection of dishes.
Turn the knob to choose the one you want and push
to select.
Place the dish in the oven at the level suggested in
the display. Close the door the AUTO sign appears
for a few seconds and then disappears. The oven
starts the cooking cycle as the oven's sensors start
working and the display panel flashes. The cooking
time is displayed and AUTO appears. You can now
open the door to rearrange food. Do not add any
more food as the time calculation has taken place.
When cooking ends the oven beeps several times.
2
10:38 Page 2