Brandt EASY COOK Mode D'emploi page 3

99626453_ML_A.qxd 17/09/03
Advantages and operating method
D
b) elayed cooking:
Turn the selector to "EASY COOK".
Choose which dish you are going to cook from the
display panel using the button.
Place your dish in the oven and shut the door.
Turn method selector to "
Turn the knob + or - to set the time you want the
food cooked by.
E.g. 1 pm (13:00).
When you have done this the start of cooking will be
delayed. The cooking time is worked out automatical-
ly. As when cooking straightaway, the time allowed may be adjusted by the
oven during cooking and the end result may vary by a couple of minutes (+ or
-) compared with the initial time given.
T
3. ips
Once the "Auto symbol" appears in the display panel,
you can open the oven door.
Once it starts flashing however, if you open the oven
door, it will make a warning sound and the dishes
symbol will blink.
The "EASY COOK" feature MUST START WITH A COLD
OVEN. You must wait for the oven to cool down com-
pletely before using the Easy Cook method again. If the oven is not cool
enough, the temperature and the dish symbols will blink in the display panel
and you will not be able to cook.
D
4. o not place trays or dishes on the base of the oven
when using Easycook.
T
5. roubleshooting
I
f you realize that...
Beeps and symbols
The symbol --- is flashing in the
display panel.
"Auto" is displayed
The "EASY COOK" feature selec-
tor, symbols and temperature are
blinking and a beep is audible.
10:38 Page 3
" .
P
ossible causes
• You have opened the door while
the oven is scanning. The program-
me has been cancelled.
• The oven is calculating the best
cooking time.
• The oven has now worked out the
appropriate cooking time.
• The oven is too hot to use the
"EASY COOK" feature.
T˚
c
W
hat should you do?
- Let the oven cool down and try
again.
- This is perfectly normal.
- This is perfectly normal.
- Either wait for the oven to cool
down or use a different cooking
method.
GB
3