Main Components List; Optional Accessories - Stanley ProSet PB3400 Traduction Des Instructions Originales

2.4 MAIN COMPONENTS LIST (for complete tool explosion and Bill of Material please see service manual)
ProSet® PB2500 drawing can be found inside the front cover
ProSet® PB3400 drawing can be found inside the back cover
A Nose pieces
B Nose housing
C Nose housing nut
D Collector lock
E Collector shutter
E2 Quick release collector
F Hook accessory attachment
H Exhaust vent
I Handle
J Switch
K Battery pack
L Manual
M Charger lamp

2.5 OPTIONAL ACCESSORIES

WARNING: Since accessories, other than those off ered by POP®Avdel® have not been tested with this
product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only
POP®Avdel® recommended accessories should be used with this product. Consult your dealer for
further information on the appropriate accessories.
WARNING: To reduce the risk of serious personal injury, disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
For a complete list of nose equipment and other accessories available for the PB Series, please visit our
website http://www.stanleyengineeredfastening.com/resource-center/document-library
N Charger
O Battery charger connection
P Jaw guide
Q Jaws
R Jaw pusher assembly
S Jaw pusher spring
T Pulling head
U Front clutch or Jaw case lock
W Collector space
Y Rivet
Z Front end componets
AA Mandrel guide
E N G L I S H
12