Tuxhorn tubra-eTherm S Manuel D'installation page 82

1. Language:
Î Adjust the desired menu language.
2. Daylight savings time adjustment:
Î Activate or deactivate the automatic daylight sav-
ings time adjustment.
3. Date:
Î Adjust the date. First of all adjust the year, then the
month and then the day.
4. Time:
Î Adjust the clock time. First of all adjust the hours,
then the minutes.
5. Maximum temperature:
Î Adjust the desired maximum temperature.
6. Nominal power:
Î Adjust the nominal power of the electric immer-
sion heater.
7. Variant:
Î Select the power control variant.
The following settings are available:
• Sensor module
• 10V IN (external 0-10 V power control)
18
8. Completing the commissioning menu:
Lastly a security enquiry will appear. If the security en-
quiry is confirmed, the adjustments will be saved.
1. In order to confirm the security enquiry, press the
centre button (OK).
2. In order to reenter the commissioning menu chan-
nels, press button . After you have confirmed the
security enquiry, the controller is ready for oper-
ation and normally the factory settings will give
close to optimum operation.
Note
The adjustments carried out during commissioning can be changed any-
time in the corresponding adjustment channel.
Set the code to the customer code before handing over the con-
troller to the customer (see page 27).